A group of Cape Breton wood carvers were looking for some big pine for carving. We were happy to help out.
First up was the largest pine log we had, a 24″ wide (18″ on the small end).
Cut and turn.
One more turn.
Just about done. A quick review to cut off an inch board to make the 14×14 cant. Deciding on which side of the cant to cut the board from. A quick 180º roll over and we’ll be done.
All done, a 14 x 14 inch pine cant.
Stacked and stickered onto a pallet.
Also included are a few 8 inch thick live edge and a couple 6 inch thick live edge pine slabs.