Chainsaw,  Foresty,  Machinery

CBN Plated Chainsaw Sharpening

Uniformity in design brings consistency in results. When it comes to chainsaw sharpening, consistency in the tooth sharpening and rake height means that your job of sawing through wood takes less effort. You literally have an easier job of slicing through the wood.

diamond plated wheels,sharpening services,forestry,logging
Our chainsaw sharpening wheels.

We designed our sharpening wheels to fit chainsaw chains sharpening machines that accept 5 inch diameter wheels. The grit is equivalent to 100/120 sandpaper. If you require a custom size or grit, please let us know.

Below is a well worn chainsaw chain. Its pretty much at the end of its life but good enough to show differences in stone grinding wheels and our plated wheel.

First up, a tooth sharpened with a stone wheel. Note the dark areas that the wheel did not touch, therefore the tooth is not perfectly sharpened.

chainsaw chains, sharpening services,forestry,logging,Nova Scotia,Antigonish county
Stone wheel sharpened.

Now let’s take a look at the adjoining tooth that has been sharpened with one of our wheels. Note the bright metal exposed from the rake of the tooth right through to the bottom of the gullet.

chainsaw sharpening services,Nova Scotia,Antigonish County,Guysborough County,Pictou County
Chainsaw tooth sharpened with one of our CBN coated wheels.

Here’s another couple pictures, first a stone wheel sharpened tooth. Note the dark area under the edge of the tooth that was not sharpened.

chainsaw sharpening services,Nova Scotia,Antigonish County,Guysborough County,Pictou County
Inconsistent stone sharpening of tooth and gullet.

And the next tooth sharpened with our sharpening wheel.

chainsaw sharpening services,Nova Scotia,Antigonish County,Guysborough County,Pictou County
Consistence, clear sharpened chainsaw tooth.

A Newfoundland born Canadian with a life long interest in woodworking, baking and anything else that peaks my curiosity.

Leave a Reply

Your email address will not be published. Required fields are marked *