Milling Lumber

Milling pine

Another week has flown by. With the days getting shorter, there is no time after supper to get anything accomplished outdoors. That leaves us with afternoons and weekends.

view,lake,sawmill
Early morning view

That picture was taken before lunchtime, but when we went out to the mill earlier in the morning, it was cold and foggy. This picture was taken standing in the same spot. That’s FOG!

lake,sawmill
Same view

Oh, and it was COLD. How cold was it? So cold, that Jim was sporting a toque. His “security blanket” toque. He doesn’t go anywhere without it come the cold weather.

Jim
I think its time for a new hat!

Once we got warmed up the hat came off and we were in business.

sawmill,pine logs
Turning the log on the mill.

Here is what the inside of that log looked like. 16 inches wide.

pine logs,
Nice wide planks

We completed an order for a customer. He wanted five wide live-edge pine boards and some 3.5 x 3.5 posts.

pine,sawmill
Customer order

We decided to get as many two inch thick boards as possible for ourselves. We can always cut them down in size later if needed. We also wanted some two inch live-edge boards. The bark needed to be removed on the live-edge so I got started on that job using a small axe.

bark,pine,live edge
Removing bark from pine

Then Jim stepped in with a draw knife. He is always making my life easier 🙂

pine logs,live edge
Live edge pine

And all finished…

live edge pine
Bark removed.

These will take longer to dry of course. But I have lots of time. We are still exploring our options with regards to a kiln. Thats why we haven’t worked on the new shed in some time. The kiln system we end up with will determine how the building is constructed.

WE FINISHED MILLING THE PINE LOGS!! We ended up with approximately 1000 board feet of lumber. There are two pallets of 1″ lumber…

pine lumber
One inch pine

One pallet of 2″ lumber plus four 6 x 6 posts…

pine lumber
2″ lumber plus posts

Also numerous 2″ live edge boards we have in the shipping container.

pine lumber
Odd lengths of lumber

For wrapping the pallets, there is conflicting information on the web. Earlier in the fall we were wrapping the top and long sides with tarps and leaving the ends open. We found the tarps were trapping moisture and we needed more airflow so we opted to just cover the top.

We acquired about 60 cement blocks (4x8x16 inches) to use to weigh down the lumber and help prevent warping. We placed three rows of three on each stack supported by stickers. Each brick weighs 40 lbs.

lumber,cementCement blocks for weight

lumber,pine
End view

Just doing the math in my head… that means we milled about 125 logs this summer/fall. And it was fun! Not bad for our first year. Only got the mill last fall. Seems like longer.

Have a great weekend.

Later

 

Leave a Reply

Your email address will not be published. Required fields are marked *