So here you can see the aluminum track and the use of butyl tape to adhere the glass to the track and the wood frame. The grey butyl tape shown earlier along with the aluminum tracks drawings will make more sense.
The tape is applied, the paper seal removed and then the bottom portion of the track lays on top of it.
Then it deck secured to the joist, I used deck screws.
The top cap is then tapped into place… gently… but with sufficient force that leaves you scrunching your butt cheeks as the aluminum clicks into place. More than once I waited for instant shattering of the safety glass.
Some of the tracks were not like the others. So I had to wait again to have the company send the right parts.